|
A
new and revolutionary sanding system for drywall, plaster, and
other wall and ceiling materials, the new Porter Cable Drywall
Sander enables workers to finish wall and ceilings 3-4 times faster
than with conventional methods. Clean up time is minimized
by the use of an external vacuum attached to the tool, and finish
is superior to other finishing methods.

- Weighs
only 8 lbs., so that drywall operator will not become fatigued
in day long sanding operations.
- The
overall length of the tool is 62 inches, so that an operator
can sand 10' ceilings without using stilts or a scaffold.
- The
motor is located on the opposite end of the vacuum tube/handle
arm from the sanding head for best balance and control.
- Patented
foam-backed abrasive sanding pad design virtually eliminates
swirl marks, and will not walk across the wall, for fast smooth
sanding.
- Unique
articulating sanding head swivels to conform with the wall or
ceiling, so that the operator can sand the top, middle, and
bottom of a wall or ceiling joint without changing position.
- A
brush-type skirt surrounds the sanding pad aiding in dust control,
and preventing pad from gouging wall joint.
- Built-in
dust collection connector features a unique swivel so that kinking
or twisting of vacuum hose is eliminated for easier operation.
- Static
dissipating 1-1/4" vacuum hose minimizes static build up
for more comfortable operation, and is 13 feet long so that
large areas can be sanded in one setup.
- Variable
speeds of 1000-1650 RPM adapt sanding pad speed to the application
for better control of sanding operations.
- Powerful
3.5 Amp motor features serviceable brushes for less down time
on job.
- Standard
equipment: Tool, 100 grit sanding pad, 13 foot static dissipating
1-1/4" vacuum hose, hook and loop straps for mounting power
cord to vacuum hose, and operating manual.
|